SER.68 model
Slurry bi-directional high pressure full flanged knife gate valve with rubber sleeves
The Series 68 (HG) model knife gate is a bi-directional full flanged heavy duty valve equipped with two metal reinforced rubber sleeves designed for use in the handling of abrasive slurries, mainly in industries such as:
- Mining
- Power plants
- Chemical plants
- Wastewater treatment
- etc.
Sizes
3in / 80mm to 36in / 900mm (larger DN on request)
Working pressure
3in / 80mm to 36in / 900mm: 300 psi / 20 bar
Note: higher pressures and/or diameters on request
Standard flange connection
ASME B16.5 (class 300)
EN-1092 PN25
Other flange drillings available on request
OTHER FLANGE CONNECTION (ON REQUEST)
Standard face to face
See catalogue
Directives
For EU Directives and other Certificates please see the document: Directives & Certificates Compliance - Knife Gate Valves – Catalogues and Datasheets
Please contact Orbinox for information and availability of categories and zones.
Downloads
- HG (SER. 68) - Rubber sleeve for slurry (Metric) (Catalogues) pdf - 894.65 KB
- SER.68 - Rubber sleeve for slurry (Imperial) (Catalogues) pdf - 953.40 KB
- HG - Rubber sleeve for slurry (Metric) (Datasheets) pdf - 327.76 KB
- SER.68 - Rubber sleeve for slurry (Imperial) (Datasheets) pdf - 322.20 KB
- Installation Operation & Maintenance Manual HG (Manuals) pdf - 689.11 KB
- Directives and Certificates Compliance - Knife Gate Valves -Catalogues and datasheets (Certificates) pdf - 175.56 KB
- Directives and Certificates Compliance - Knife Gate Valves -IOM (Certificates) pdf - 319.15 KB